RE: #Pro Airbrush Air Compressor Twin Piston w/ Tank 1/3 HP
This twin-cylinder airbrush compressor with precision-forged pistons delivers impressive power (1/3 horse) with low noise (59 db). Sensitive, diaphragm regulator with integrated pressure gauge and water-trap allows precise control and delivery of clean, dry air. Dual operating modes; with the power switch in the primary position, the compressor runs until its pressure reaches 60 psi, then it cycles off until the pressure drops to 40 psi, where the unit restarts. This power-saving, auto-start/stop feature reduces motor wear while maintaining enough pressure to operate most airbrushes. In the secondary switch position the compressor runs constantly; used when maximum output is desired (up to 100 psi). One gallon (3.5 liter) air-tank stores the air pressurized by the motor, reducing the number of run cycles. The air-tank also helps to smooth the output; eliminating the pressure pulsations sometimes found in tankless compressors. Tank a threaded drain plug for purging any accumulated water and a pressure-release valve for safety (release pressure prior to draining). Easy-carry handle and rubber feet to protect your work surface. Oil-less design makes this compressor suitable for food decorating and body/nail art along with all other standard airbrushing applications. Approximate air delivery of 1.3 CFM. Connections: 1/8" BSP male outlet. Dimensions: 13" long, 5" wide, 12" tall. Weight: 16 pounds. Grounded 120 volt power cord (6'). Model: Elite-275XP from PointZero Airbrush. Maintenance-free, CE certified and thermally-protected. Operating manual included.